| |   Staber HXW 2304 Washing Machine
Staber System HXW 2304 Washing Machine - This residential model is a commercial-quality washer that uses the least amount of energy, water, and soap. The only top load horizontal-axis washer made in the U.S.; holds up to 16 bath towels. Uses only 110-150 Watt*Hrs per load.
How Does Staber Compare With the Traditional Top Load Agitator Washer You May Be Currently Using?
Do you want to use around 45 gallons of water per load or around 15 gallons of water?
Do you want tubs made of durable stainless steel or tubs made of plastic or porcelain?
Do you want to heat an average of 3 gallons of hot water or 12 gallons of hot water per load?
At an average of eight loads per week, do you want to spend around $600 each year to use your washer or just $260 with a Staber?
Do you want to use 1 ounce of detergent per load with a Staber, or 4-8 ounces per load?
Would you like to wash up to 16 bath towels in one load, or just 8-10 towels with a traditional agitator washer?
Would you like to reduce your drying time by about 30% (and save more energy) by using a Staber that features a much faster spin cycle?
Would you like to have total front access to parts and no transmission to reduce your maintenance expenses?
Do you want a standard residential domestic washer that will last an average of just 12 years or a commercial-grade washer for the home that will last 20-25 years?
Do you want your tubs to be circular, or do you want them to be shaped so that they create a passive pumping action in the water to clean more effectively?
Would you prefer a heavy-duty four strut suspension to prevent the washer from ‘walking’ in the spin cycle?
Would you like to have two re-greasable bearings per shaft, supported on the front and the back of the tubs for greater durability?
Do you want your clothes to last around 30% longer because of using a gentle tumbling action as opposed to using a harmful agitator that can shred your laundry?
Would you like to use around 135 watt-hours of electricity per load to use a Staber, or around 600 watt-hours to use a traditional agitator washer?
Do you want your warranty to be voided if using solar power or not?
Even though it still may be working, just think about the costs of using your current washer—it all adds up! You can now see why a Staber washer makes so much more sense compared to a traditional agitator washer.
Here is what you need to consider:
Currently you may be spending over $600 annually to operate your washer if you are doing around 8 loads per week.
Therefore, if you invest $999 in a Staber washer now, it will provide you a return of around $340 each year for the rest of its life. (This does not include the savings in reducing your drying time, and the time saved in having to possibly do fewer loads.)
This gives you close to a 30% return on your investment every year you own it.
Compared to the Average Front Load Washer Design, Staber...
Has top loading convenience so you do not have to bend over to load/unload
Uses about half the water (around 12-16 gallons compared to 22-28 gallons), thus less energy to heat the hot water
Uses less detergent (1 ounce compared to 2-3 ounces), due to less water per fill and better agitation with our patented tub design. This represents the largest savings.
Has a quicker payback period due to using less resources
Durable stainless steel inner and outer tubs, as opposed to a plastic outer tub
You have immediate access to the inner tub while washing if you forgot to add a pair of socks, whereas a front loader is always locked
Patented tub design creates water pumping action to clean more effectively than just circular tubs
No front water seal (or rubber boot), eliminates future leaking problems and mildew
Two re-greasable bearings per shaft, supported on front and back, as opposed to just one bearing on the back of the tub which cannot be re-greased. This provides greater durability over time.
Total front access enables consumer to easily maintain and service washer
Save on maintenance costs
Staber is a more durable, commercial-grade washer as opposed to a standard domestic residential machine
Compared to front load washers, Staber can hold about the same amount of laundry because in front loaders there is usually some unused tub space above the top of the porthole entrance that does not get utilized unless you bend over and stuff laundry up in there, which can be very inconvenient.
Using a Staber washer you can stand upright while loading and unloading as opposed to having to bend over to load from the front.
Also, when using a front loader and the tub is almost full, things like washcloths and socks tend to ‘roll out’ of the tub onto the floor or into the wet rubber gasket when you are trying to shut the door, which can be a hassle.
Specs for Models: HXW2304/2404/2504
TIME BREAKDOWN PER MAXIMUM LOAD OF CLOTHES
PREWASH = 5 MIN. PLUS FILL TIME
WASH TIME = UP TO 15 MIN. PLUS FILL TIME
RINSE TIME = TWO 5 MIN. RINSES PLUS FILL TIME
SPIN TIME = 5 MIN.
DECAKE/INDEX TIME = 3 MIN.
(Fill time is determined by water inlet pressure)
TOTAL WATER USE PER LOAD IN EACH CYCLE
NORMAL LOW
NORMAL 16.5 GAL 12 GAL
PERMANENT PRESS 16.5 GAL 12 GAL
DELICATE 16.5 GAL 12 GAL
PRE-WASH & NORMAL 22 GAL
NORMAL HOT TO COLD USAGE (THIS IS DIRECTLY RELATED TO THE TEMPERATURE AND WATER LEVEL SELECTION)
WATER LEVEL/TEMP HOT COLD
NORMAL/HOT 5.5 GAL 11 GAL
NORMAL/ WARM 2.7 GAL 13.7 GAL
NORMAL/ COLD - 16.5 GAL
CLOTHES CAPACITY PER LOAD
16-18 LBS. (16-18 FULL SIZE BATH TOWELS MEASURING 26" X 42")
DETERGENT USE PER NORMAL LOAD
1 OZ. AVG.
WATTS OF ELECTRICITY PER LOAD
110-150 WATT HOURS AVG.
MOTOR TYPE
UNIVERSAL/DIGITAL-ELECTRONICALLY CONTROLLED MOTOR
MOTOR H.P. RATING
LESS THAN ˝
MOTOR AMPS BEING DRAWN IN WASH
~ 5 TO ~ 6 AMPS
MOTOR AMPS BEING DRAWN DURING SPIN
~ 3 AMPS
SPIN CYCLE RPM
~ 400 (DELICATE & PERM)
~ 600 up to 750 (NORMAL)
EXTRACTION FORCE
~ 200 G’s
TYPE OF DRAIN CYCLE
SELF CLEANING ELECTRIC WATER PUMP
THE INNER DRUM DIAMETER
~ 23" GIVING ~ 2 CUBIC FEET OF USABLE VOLUME
INNER & OUTER TUB MATERIAL
STAINLESS STEEL
AUTOMATIC DISPENSERS
PREWASH DETERGENT, DETERGENT, BLEACH, SOFTENER
SIZE OF MACHINE IN INCHES
WIDTH = 27
DEPTH = 26
BACK HEIGHT = 42
HEIGHT WITH DOOR UP = 55
MACHINE WEIGHT
NET = 175 LBS.
SHIPPING = 240 LBS.
REPAIR FACILITIES AND ARRANGEMENTS
The unit comes with a manufacturer’s warranty on parts. Staber washers are designed to be serviced by the customer. Total front access and simple design allows the customer to maintain and service their machine without having to pay large repair bills. Staber Industries offers guidance on do-it-yourself maintenance and repair. All replacement parts are shipped factory direct by FedEx or UPS to the customer.
These are shipped freight collect directly from the factory. You will be charged COD by the freight forwarding company.
We also sell the HXW 2404 for $999.00. It is a comercial non-coin unit. It is all white with a stainless steel base, a silver control panel decal with black knobs.
The HXW 2504 costs $1,049. This is also a comercial non-coin model, but it offers a stainless steel outer cabinet as well as a stainless steel base. It has a silver control panel decal with black knobs.
Call for Sale Price and Shipping Quote 1-800-810-9939
|
|
| |
